whirlpool dryer parts - dryer drum belt
by：IKE Food Machinery 2019-12-16
Hello friend, I see you must be looking for Whirlpool dryer parts.
Maybe the article you are reading now is helpful to you?
The first thing you have to know is what exactly is wrong with your device machine.
It is not heated, rolled or dried for a long time.
There are many different parts that may be bad or need to be repaired.
Now, there is a list of different types of dryer parts in front of you, and how they work, or what problems they will bring to your dryer when they work in good condition.
Dryer timer parts: they have many different part numbers for specific dryer models.
The dryer timer is exactly what the name says and it requires your power to run the rest of the dryer in a heat or time measurement.
Dryer Start switch parts: There are several different types but are common on all dryer models.
The start switch part allows you to press the switch and turn bi-on-
The metal mechanism and release the power into the dryer part to enable it to operate.
The switch can sometimes be stuck in the on position or in the off position.
Dryer belt part: there are only three different belts for this brand of dryer.
The belt number 341241 is the most replaced.
The belt allows the drum to rotate by obtaining horsepower from the motor and applying tension on the Idler wheel.
It is usually torn, broken or weathered.
Dryer motor components: there are only two different motors, one is the front seat, which means that the blower is facing the front seat and the other is the rear bracket, which means that the blower wheel is facing the rear.
These motors rotate the drum to roll your clothes at a variable speed.
These motors are often suspended or broken on the start/run winding.
Dryer blower wheel parts: these blower wheel parts only have two part numbers that match the dryer motor.
The blower wheel rotates at the speed of the motor circulating air to evenly dry the clothes.
For these people, it is common to chip and break from the pieces left in the pocket of the clothes, or to be stripped off on the motor shaft.
Dryer Idler wheel assembly: two types of idler wheels, but can be installed or work.
The Idler Wheel applies tension on the belt to make the belt turn the drum.
Idler wheels are usually worn out by belts or burnt out by hanging machines.
Also, the idler wheel could get bad due to poor maintenance and make a lot of chirchir sounds.
Drum assembly parts for dryer.
There are two different types of rollers that must match the part number.
The size of the drum is different, making the position of the drum different.
The dryer drum makes it easier for the drum to move and provides support for easy rolling.
The roller usually goes bad by rounding the bearings in the middle of the roller part.
Dryer thermostat, safety switch components: There are many different temperature and air flow ratios that match the thermostat and safety switch.
The thermostat adjusts the heat and cycles the heating temperature.
If the dryer becomes too hot or there is insufficient air flow, the safety department monitors and turns off the dryer until it is replaced.
There is another issue that needs to be diagnosed and fixed when they turn off the dryer, otherwise you will have this issue again.
This will complete the functions of mechanical and electrical components and how they break down or fail.
This article does not include heat sources, so we wrote another article about heat sources in Whirlpool dryers.
We mean there are two different types.
Gas dryer or electric dryer.