IKE

repairing your washing machine yourself - dryer machine repair

by:IKE     2019-12-15
repairing your washing machine yourself  -  dryer machine repair
If you have a problem fixing the washing machine, you don't have to call the repairman, why don't you try to fix it yourself?
Most problems with washing machines are actually common and easy to solve.
Really need to spend unnecessary money to call the maintenance guy to fix it.
Before starting to repair the washing machine, make sure to unplug the washing machine first.
Some people think that a small problem can be solved without unplugging the machine, but even if it is the smallest problem, you have to unplug it.
This is mainly for security reasons.
Also, why don't you unplug it if it only takes a second?
Before dealing with the old broken washing machine, buy the tips for parts to repair the broken washing machine, remember that your next washing machine will be broken and will come in time, you may need some spare parts to fix it.
So you might want to check your old broken washing machine and remove the parts you need before disposing.
Buying from a washing machine repair retailer is not a good idea as they will also buy old parts that recycle the washing machine.
A better option is to consult the wholesale seller of electrical parts, where you can buy new or even cheaper washing machine parts.
Please rest easily if the washer mixer is not working.
Compared to other parts of the washing machine, the mixer is relatively easier to fix.
Drive the belt to make the mixer work, and if the belt is loose, it may cause the mixer to fail in the washing machine.
To view the drive belt of the mixer, remove the back plate of the washing machine.
Find the drive belt and press it.
If the machine moves about inches, all you have to do is tighten it.
If you see that the belt drive is really damaged, it's time to buy a new one.
When tightening the drive belt, all you have to do is loosen the mounting nut on the motor slightly and relax the motor with the mountain rail.
Wait until the belt is fully tightened before installing the nut.
The last step is to return to the access panel and your washing machine will be fixed.
If you have a leaking washing machine and it is likely that it will leak from the hose, the washing machine will leak.
To solve this washing machine problem, monitor the hose when the washing machine is filled.
If you find the source of the leak, all you have to do is tighten the hose.
If you see obstacles or cracks in the washing machine, it may come from the bathtub or mixer.
Some washing machines are made of plastic and the material is quite rust-proof.
Unfortunately, the holes in these bathtubs may rust.
If you want to check if there is anything rough in your tub, simply stick an old nylon to your hand and turn over the tub.
If there is a place to block your clothes while washing, then you will find the socks.
You can easily fix it with sandpaper and sand it down.
Replace the mixer if your mixer is broken, you must find a replacement as soon as possible.
The delay may ruin your clothes.
When replacing the mixer, simply remove the dispenser that covers the mixer and remove the screws below.
After that, just lift the mixer out.
If it is difficult to remove, fill the washing machine with hot water to remove any soap or anything that hinders it.
If this does not work, gently tap the mixer with a rubber mallet in order to release the mixer.
When the mixer is removed, you can replace it with a new mixer.
When you notice that the washing machine will not be filled with water, the washing machine will not filter, and the filter screen may be blocked by the hot and cold Channel hose.
To fix this, simply turn off the cold water and hot water faucet and remove the hose by unscrewing the hose.
Check if the filter is dirty and clean.
You should also check if the hose has cut off the water flow to the washing machine.
After spinning the bike, the clothes were too wet. If you notice that the clothes are still wet after rotating the bike, it is recommended to check if the drain hose is faulty.
It can be twisted or blocked.
Check the hose and use long-handled brush.
You can buy these long ones.
Brushes processed in aquatic products or pet stores.
You can also use a brush for cleaning aquarium tubes.
If the problem is the hose twist, just take it off.
You may have to replace a new one if the inventory is very tight.
Now you can use your washing machine perfectly!
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...