four common dryer repair issues - dryer machine repair
by：IKE Food Machinery 2019-12-14
Allowing the dryer to work properly can greatly reduce the workload.
When it doesn't work properly, it adds stress and frustration to your life.
However, if you stop working, this may be one of these common dryer repair problems.
The drum did not roll.
One of the most common problems is that the device is running but the drum is not rotating.
There may be several different reasons for this problem.
The belt may break, which will prevent the drum from turning.
It could also be a car problem.
The door switch may also be stuck in the wrong position.
To diagnose and repair the dryer correctly, it is best to contact the professional.
This unit burns your clothes, and burning a bunch of clothes is enough for you not to want to use this unit again.
Like drums, there are many reasons for the machine to overheat and burn clothes.
Roller and drum seals are several problems that can cause the machine to overheat and burn down items.
Another reason may be the slide or thermostat.
As with the drum problem, it is better to hire a trained professional for repairs.
The dryer does not turn on sometimes and sometimes the device does not start.
Your first action should be to make sure that the plug is firmly placed on the socket on the wall.
You should also check the circuit breaker or fuse box to make sure the circuit breaker is not tripped or the fuse is not blown.
The device itself has a thermal fuse built in-in.
Your owner's manual will have instructions on how to locate and check the fuse.
If this is blown, just replace it and your machine will work again.
If there is no fuse, the door switch may break in the closing position.
According to your maintenance skills, the door switch is simple enough to be replaced by itself.
The machine is not heated sometimes the dryer repair is necessary because the machine is not heated at all.
It's almost as frustrating as the system burns your items.
Your first step should be to make sure that the temperature setting does not change unexpectedly.
Most units have an "fluff" or another environment that blows air but does not generate heat.
However, if your setting is in the position that should be, then there may be a problem with the electronic ignition.
Sadly, this part is not the easiest to reach.
Manufacturers usually hide it so that only people trained in model repair can access it and replace it.
You may also need specialized tools to remove it.
Dryer maintenance is usually limited to very specific issues.
Depending on how convenient you are, you can at least diagnose the problem yourself.
There are several issues that should be dealt with by trained professionals to avoid hurting themselves or further damaging the machine.